Intelligent Lubrication Solutions™

Lubricants/Fluids

Passenger Car/Installer

Engine Oils

Transmission Fluids

Miscellaneous Fluids

Commercial/Heavy Duty

Diesel Engine Oils

CNG Engine Oils

Hydraulic Fluids

Gear Oils

Greases

Transmission Fluids

Diesel Exhaust Fluids

Miscellaneous Fluids

Industrial

Hydraulic Fluids

Gear Oils

Maintenance Oils

Compressor Oils

Greases

Miscellaneous Industrial Fluids

Renewable Biodegradable Fluids

Metalworking

Cutting Oils

Coolants

MQL Fluids

Corrosion Inhibitors / Cleaners / Degreasers

Forming/Casting / Drawing / Stamping / Quench Lubricants

Fluids Storage and Handling

Waste Oil Removal, Oil Recycling and Remediation

Contamination Control and Fluid Conditioning

Desiccant Breathers

Essential Desiccant Breathers

Extreme Humidity Desiccant Breathers (EX Series)

Extreme Vibration Desiccant Breathers

Passive Oil Dryers

Reservoir Breather Kits

Breather Adapters

Filtration Systems

Mobile Filtration

Filter Media

Drum Pump Filtration/Dispensing

Coolant Management

Coolant Mixing Solutions

Filtration Systems

Solvent Distillation Systems

Condition Monitoring

Oil Sampling Tools

Sampling Valves, Tubes, Fittings, Accessories

Sampling Guidelines

Visual Inspection Tools

OilChek Oil Analysis Lab Services

Oil Analysis

Fuel Analysis

OilChek Customer Login

Lubrication Systems

Constant Level Oilers

Pressure Differential Products

Machine Health Services

Lubrication Management

Contract Lubrication Services


  

Sampling Valves, Tubes, Fittings, Accessories

Trico Sampling Ports, Tubes, Fittings and Accessories

Sampling ports (valves) are designed to draw samples from the most representative areas of industrial equipment, and to collect samples under the equipment’s typical operating condition. The ports are a simple, quick and accurate way to take samples from hydraulic, lubricating, and circulating systems. Access to systems is obtained through the use of a mating sample port adapter that screws onto the sample port. To guard against contaminating the sample and for superior leak protection, Trico sampling ports all feature a check valve and Viton® o-ring seal cap.

  • Protective cap seals against dirt and moisture
  • Cap connected to sample port with a heavy brass chain to prevent loss
  • Sample directly from lubricating oil while equipment is running
  • Minimizes introduction of contamination to systemUsed in conjunction with proper accessories sample ports are adaptable to pressure, static, and vacuum locations

Sampling ports and port adapters are available in several types and sizes to match the varying requirements of lubrication systems.

Model No. Description Port Connection (Dim A) Material Dim B
36100 Sample Port 1/8" NPT Carbon Steel M16 x 2
36101 Sample Port 1/4" NPT Carbon Steel M16 x 2
36102 Sample Port 1/8" NPT Carbon Steel M16 x 2
36103 Sample Port 1/4" NPT Carbon Steel M16 x 2

The port adapter simply screws onto the sample port to draw lubricant from the equipment.The adapter has a Viton® o-ring seal and can be used across an operating temperature range from -4oF to 392 oF and can connect under 5000 PSI (400 bar) pressure with a maximum operating pressure 9000 PSI (630 bar).

Model No Description Port Connection (Dim C) Dim D Material
36133 Port Adapter Barb for 1/4″ OD Tube M16 x 2 Plated Steel

Gauge Adapters are used in conjunction with sample ports to attach pressure gauges for troubleshooting purposes.

  • Available in two thread izes
  • Measure pressure directly from lubricating oil while equipment is running
  • Minimizes introduction of contamination to system

Specifications

Model No Description Port Connection (Dim A) Dim D Material
36108 Gauge Adapter 1/2" NPT Female M16 x 2 Carbon Steel
36107 Gauge Adapter 1/4" NPT Female M16 x 2 Carbon Steel
Maximum Working Pressure 9000 PSI (630 bar)
Connect Under Pressure 5800 PSI (400 bar)
Check Valve Ball Stainless Steel
Maximum Operating Temperature -4ºF to 392ºF

Pitot Tubes are equipped with sampling ports and are designed to provide a safe, simple and effective method of sampling fluids from sumps and non-flooded horizontal drain lines. They install easily into drain, fill, or sampling pipe ports, and ensure oil samples are drawn from the most appropriate location of the sump reservoir. They also ensure that the sample is taken from the exact location inside the system each time, which is important for maintaining consistency in routine sampling. The thick wall tubing can be bended and directed to the ideal sampling location with the use of a swivel adapter.

Sampling tubes are available in various types and lengths, and with swivel options to match the varying requirements of lubrication systems:

Model No. Description Tube Length Swivel Adapter Port Material Tube Material Fitting (NPT Male)
36204 Pitot Tube 12" N0 Carbon Steel Stainless Steel 1/4"
36207 Pitot Tube 18" No Carbon Steel Stainless Steel 1/4"
36210 Pitot Tube 24" No Carbon Steel Stainless Steel 1/4"
36217 Pitot Tube 12" Yes Carbon Steel Stainless Steel 1/4"
36220 Pitot Tube 18" Yes Carbon Steel Stainless Steel 1/4"
36223 Pitot Tube 24" Yes Carbon Steel Stainless Steel 1/4"
36206 Pitot Tube 12" No Stainless Steel Stainless Steel 1/4"
36209 Pitot Tube 18" No Stainless Steel Stainless Steel 1/4"
36212 Pitot Tube 24" No Stainless Steel Stainless Steel 1/4"
36219 Pitot Tube 12" Yes Stainless Steel Stainless Steel 1/4"
36222 Pitot Tube 18" Yes Stainless Steel Stainless Steel 1/4"
36225 Pitot Tube 24" Yes Stainless Steel Stainless Steel 1/4"
Maximum Pressure 500 PSI (34.5 bar)
Material Carbon Carbon Steel or Stainless Steel
Check Valve Ball Stainless Steel
Seal Viton®
Maximum Operating Temperature -4ºF to 392ºF

Liquid Level Gauge Sample Ports provide easy viewing of fluid levels and oil condition in many industrial applications. They are ideal for bearing housings and other non-pressurized applications. Liquid Level Gauge Sample Ports include a Pitot Tube for static sampling, which provides repetitive, representative oil sampling.

  • Guards are standard on all sights and may be rotated 360º for easy viewing of fluid level and condition
  • Liquid Level Gauge Sample Ports are equipped with Pitot Tubes in lengths of 12″, 18″, and 24″
  • Level gauge sights are available in various lengths
  • For use with non-pressurized systems
Model No. Description Tube Length Sight Length (Dim B) Fitting (NPT Male) Dim A
36441 LLG Sample Port 12" 3-1/2" 1/4" 2.00"
36442 LLG Sample Port 18" 3-1/2" 1/4" 2.00"
36443 LLG Sample Port 24" 3-1/2" 1/4" 2.00"
36307 LLG Sample Port 12" 5-1/2" 1/4" 2.18"
36329 LLG Sample Port 18" 5-1/2" 1/4" 2.18"
36351 LLG Sample Port 24" 5-1/2" 1/4" 2.18"
36308 LLG Sample Port 12" 7-1/2" 1/4" 2.18"
36330 LLG Sample Port 18" 7-1/2" 1/4" 2.18"
36352 LLG Sample Port 24" 7-1/2" 1/4" 2.18"
36444 LLG Sample Port 12" 3-1/2" 3/8" 2.00"
36445 LLG Sample Port 18" 3-1/2" 3/8" 2.00"
36446 LLG Sample Port 24" 3-1/2" 3/8" 2.00"
36373 LLG Sample Port 12" 5-1/2" 3/8" 2.00"
36395 LLG Sample Port 18" 5-1/2" 3/8" 2.00"
36417 LLG Sample Port 24" 5-1/2" 3/8" 2.00"
36374 LLG Sample Port 12" 5-1/2" 3/8" 2.00"
36396 LLG Sample Port 18" 5-1/2" 3/8" 2.00"
36418 LLG Sample Port 24" 5-1/2" 3/8" 2.00"
Material (Level Gauge) Brass
Material (Pitot Tubes) Stainless Steel
Sight Glass
Seals Viton®
Maximum Operating Temperature 250ºF

Model 36813 Sample Bottle with Vacuum Pump

Vacuum Pumps are necessary tools for extracting an oil sample from the sample port. This is a compact pump, easy to transport and use (model 36800). Coupled with a sample port adapter, flexible tubing, and an oil sample bottle, it can be used to draw contamination-free samples in the most representative locations. A heavy-duty model that includes a release valve is also available (model 36801).

  • Draws a vacuum of 27 inches of Hg (Mercury)
  • 38-400 bottle thread
  • Uses 3/16″ to 5/16″ tubing

Sample Bottles (4oz and 8oz), Purge Bottles (16 oz, used to flush out the dead zone of hoses, tubing, and equipment when drawing oil samples for oil analysis), a black plastic Mailer Tube (used to mail a single 4 oz sample bottle of fluid for lab analysis, it protects the sample and helps eliminate leakage during shipment to the oil analysis lab), and Flexible Tubing (1/4”, 5/8”, and 1/2” OD) are also available accessories needed to put a complete sampling process in place.

Checkfluid Sampling Valves, Tubes, Fittings and Accessories

U.S. Lubricants also distributes the complete line of Checkfluid sampling valves, sampling probes, and related fittings and accessories.

Facebook Twitter Email LinkedIn Print Addthis

Home I Contact Us I Terms & Conditions I Privacy Statement I
U.S. Lubricants is a division of U.S. Venture, Inc. © 2016 U.S Venture, Inc.

US Venture US Autoforce US Oil US Gain