Intelligent Lubrication Solutions™

Lubricants/Fluids

Passenger Car/Installer

Engine Oils

Transmission Fluids

Miscellaneous Fluids

Commercial/Heavy Duty

Diesel Engine Oils

CNG Engine Oils

Hydraulic Fluids

Gear Oils

Greases

Transmission Fluids

Diesel Exhaust Fluids

Miscellaneous Fluids

Industrial

Hydraulic Fluids

Gear Oils

Maintenance Oils

Compressor Oils

Greases

Miscellaneous Industrial Fluids

Renewable Biodegradable Fluids

Metalworking

Cutting Oils

Coolants

MQL Fluids

Corrosion Inhibitors / Cleaners / Degreasers

Forming/Casting / Drawing / Stamping / Quench Lubricants

Fluids Storage and Handling

Waste Oil Removal, Oil Recycling and Remediation

Contamination Control and Fluid Conditioning

Desiccant Breathers

Essential Desiccant Breathers

Extreme Humidity Desiccant Breathers (EX Series)

Extreme Vibration Desiccant Breathers

Passive Oil Dryers

Reservoir Breather Kits

Breather Adapters

Filtration Systems

Mobile Filtration

Filter Media

Drum Pump Filtration/Dispensing

Coolant Management

Coolant Mixing Solutions

Filtration Systems

Solvent Distillation Systems

Condition Monitoring

Oil Sampling Tools

Sampling Valves, Tubes, Fittings, Accessories

Sampling Guidelines

Visual Inspection Tools

OilChek Oil Analysis Lab Services

Oil Analysis

Fuel Analysis

OilChek Customer Login

Lubrication Systems

Constant Level Oilers

Pressure Differential Products

Machine Health Services

Lubrication Management

Contract Lubrication Services


  

Mobile Filtration

       

High Viscosity Filtration Cart

Trico’s High-Viscosity Filter Cart System is specifically designed for high-viscosity fluids associated mainly with gear oils and can filter oils up to 7500 SUS @ 100ºF (1600 cSt @ 40ºC).

To ensure that the equipment receives the cleanest oil possible, for increased equipment life, Trico’s High-Viscosity Filter Cart System provides two-stage filtration. The oil flows through the primary filter first, where coarse particulates are removed. Then the fluid flows through the secondary filter where fine particulates and water are removed.

The system is available with a high grade industrial grade gear pump or pneumatic motor. A variety of filter media elements are available to meet recommended manufacturer cleanliness levels.

Bypass Valve – Allows transfer of oil without filtering.

Oil Sampling Ports – Two sampling ports available to monitor condition of oil.

Quad Filters – Four filter elements for increased holding capacity

Industrial Strength Tires – Wide tires capable of getting over large grate gaps

Differential Pressure Gauges – Indicates when elements need to be changed

Heavy Duty Cart – Rugged and built to last

Hose & Wand Assembly – Heavy steel wire reinforced clear PVC hoses with 3 ft long metal wands

Drip Pan – Keeps work area safe and clean

Specifications

Pump Type Industrial Grade Gear Pump or Pneumatic Motor
Flow Capacity 4 GPM – Electric
3 GPM – Pneumatic
Pump Speed 1725 RPM – Electric
Variable up to 3000 RPM – Pneumatic
Maximum Inlet Vacuum 8″ of Mercury
Hose Sizing @ 2 ft/sec 1.25″ Diameter @ 6 ft Long
Max. Operating Temperature 150ºF (65ºC)
Pump By-Pass 105 PSI
Filter By-Pass 43 PSI
Maximum Viscosity 1600 cSt @ 40ºF / 7500 SUS
Seal and Gasket Material Viton®
Electrical Service Required 120 Volts, 20 Amps, Single Phase, 60 Hz (electric version only)
Air Inlet Connection 1/4″ NPT Female (pneumatic version only)
Max. Operating Pressure 100 PSI (pneumatic version only)
Weight 140 lbs – Electric
156 lbs – Pneumatic
Dimensions 28″W x 21″D x 48″H

Low Viscosity Filtration Cart

The Low-Viscosity Portable Filter Cart System provides convenient off-line filtration, flushing, conditioning, and fluid transfer of industrial oils. The system is capable of delivering a flow up to 14 GPM and is rated for use with lubricants up to a viscosity 2,000 SUS @ 100ºF. To ensure equipment receives the cleanest oil possible for increased life, the system utilizes a two-stage filtration process–oil enters through the primary element where coarse particulate is removed, and then moves through the secondary filter element where fine particulate and water is removed. For added utility, the new filtration system features differential pressure gauges that indicate when each of the filter elements need to be changed. Two sampling ports are included for safely sampling and monitoring the condition of oil.

A variety of filter media elements are available to meet recommended manufacturer cleanliness levels.

Bypass Valve – Allows transfer of oil without filtering

Oil Sampling Ports – Two sampling ports available to monitor condition of oil

Manifold System – Encompasses valves and plumping in one location

Dual Filters – Two-stage filtration for long element life and pump protection

Industrial Strength Tires – Wide tires capable of getting over large grate gaps

Heavy Duty Cart – Rugged and built to last

Pressure Relief Valve – Prevents over pressurizing and damage to pump, hoses, and filter

Check Valve – Prevents fluid back flow when pump vertically

Differential Pressure Gauges – Indicates when elements need to be changed

Hose & Wand Assembly – Heavy steel wire reinforced clear PVC hoses with 3′ long metal

Specifications

Pump Type Steel Internal Gear Pump
Flow Capacity 14 GPM
Electric Motor Rating 1-1/2 HP @ 1750 RPM
Maximum Inlet Vacuum 8″ of Mercury
Hose Sizing 1″ Diameter @ 6′ Long
Maximum Operating Temperature 150ºF (65ºC)
Pressure Relief 100 PSI
Maximum Viscosity 430 cSt @ 40ºC / 2,000 SUS
Seal and Gasket Material Mechanical – Static
Electrical Service Required 115 Volts, 15.2 Amps, Single Phase, 60 Hz
Maximum Filter Operating Pressure 120 PSI
Weight 130 lbs
Dimensions 28″W x 18″D x 48″H
         

High Viscosity Hand Held Filtration System

Trico’s High-Viscosity Hand Held Filtration System is specifically designed for high-viscosity fluids associated mainly with gear oils and can filter oils up to 7500 SUS @ 100ºF (1600 cSt @ 40ºC).

To ensure that the equipment receives the cleanest oil possible, and for increased equipment life, Trico’s High-Viscosity Filter Cart System provides two-stage filtration. The oil flows through the primary filter first, where coarse particulates are removed. Then the fluid flows through the secondary filter where fine particulates and water are removed.

The system is available with a high grade industrial grade gear pump or pneumatic motor. A variety of filter media elements are available to meet recommended manufacturer cleanliness levels.

Specifications

Pump Type Industrial Grade Gear Pump or Pneumatic Motor
Flow Capacity 1 GPM
Pump Speed 1725 RPM – Electric
Variable up to 3000 RPM – Pneumatic
Maximum Inlet Vacuum 15″ of Mercury
Hose Sizing @ 2 ft/sec .75″ Diameter Inlet @ 6 feet long
Max. Operating Temperature 150ºF (65ºC)
Pump By-Pass 85 PSI
Filter By-Pass 43 PSI
Maximum Viscosity 1600 cSt @ 40ºF / 7500 SUS
Seal and Gasket Material Viton®
Electrical Service Required 115 Volts, 10 Amps, Single Phase, 60 Hz (electric version only)
Air Inlet Connection 1/4″ NPT Female (pneumatic version only)
Max. Operating Pressure 100 PSI (pneumatic version only)
Weight 50 lbs – Electric
49 lbs – Pneumatic
Dimensions 27″W x 13″D x 17″H

Low Viscosity Hand Held Filtration System

The Low-Viscosity Hand-Held System is a compact, light unit for transferring and filtering particulate and water out of industrial oils. The unit is ideal for hard to reach places and application with 3-50 gallon reservoirs. The system is capable of delivering a flow up to 5.5 GPM and is rated for use with lubricants up to a viscosity of 2,000 SUS @ 100ºF.

A variety of filter media elements are available to meet recommended manufacturer cleanliness levels.

Oil Sampling Ports – Two sampling ports available to monitor condition of oil

Differential Pressure Gauges – Indicates when elements need to be changed

Dual Filters – Two-stage filtration for long element life and pump protection

Bronze Internal Helical Gear Pump – Industrial quality for long life

Compact Frame – Lightweight design provides flexibility to service equipment located in hard to reach areas

Hoses – Heavy-duty reinforced clear PVC

Specifications

Pump Type Bronze Internal Helical Gear Pump
Flow Capacity 5.5 GPM
Electric Motor Rating 1/2 HP @ 1750 RPM
Maximum Inlet Vacuum 15″ of Mercury
Hose Sizing .75″ Inlet @ 6′ Long / 1.0″ Outlet @ 6′ Long
Maximum Operating Temperature 150ºF (65ºC)
Pressure Relief 50 PSI
Maximum Viscosity 430 cSt @ 40ºC / 2,000 SUS
Seal and Gasket Material Mechanical – Static
Electrical Service Required 115 Volts, 8.8 Amps, Single Phase, 60 Hz
Suction / Lift 20 ft
Weight 47 lbs
Dimensions 11″W x 20″D x 12″H
           
Facebook Twitter Email LinkedIn Print Addthis

Home I Contact Us I Terms & Conditions I Privacy Statement I
U.S. Lubricants is a division of U.S. Venture, Inc. © 2016 U.S Venture, Inc.

US Venture US Autoforce US Oil US Gain